Then, take the lower threshold and install it. Notice the place where the hinges are located by pla

Insert active foam doors between rooms in a hole you can do yourself without causing the master and thus saving money. For this case you need a box, door leaf, the threshold border, nails, hinges, drill, slope, foam and tape. If possible, the nails can be replaced with wood screws that can be screwed using the screwdriver or a drill, if you insert it instead of drills during special attachment screws (bits). Door frame must be collected on a flat area.
Bar at the top of insult at 90 degrees and prepare the next item boxes that connect the box. Its length must be clearly measure, then vypylyaty L-shaped gap for fastening of timber frame. Connect elements.
Then, take the lower threshold and install it. Notice the place where the hinges are located by placing active foam a mark on the top and bottom edge of the door at 200 mm. Connecting box nails or screws, pre prosverdlyvshy holes for them to not split the wood. Now we need to install hinges. active foam
There are left, right and bilateral loop. Determine necessary for you. For wooden doors and enough pairs of loops. Before you insert loops, they will need to identify the location. It is best to do this procedure with a scalpel active foam or sharp knife, not a pen or pencil.
When the loop to cut, they should be mounted on the thickness of the plate loops. Make the loop located on the surface evenly. Deepen for door hinges should be cut using a chisel. Hinges shall be mounted on the screws, but before that we must make the holes for them.
When the door is properly active foam adjusted active foam and adjusted, it is necessary to fill the gap that remained between the doorway and foam box. But above all, you need to put spacers between the two paintings frame that are opposite each other. active foam Blocking put through 500 mm from the top of the box to the bottom or vice versa, then it is necessary that the foam is not squeezed box and would not have it then remove the door properly closed.
If you have things worked out, remove any remaining foam and attach trim for doors, active foam pre-prepared them. Friends, if you liked the article share information, if you is not difficult in social networks with your friends! If you have any questions and add on the topic, leave your comments, I will always active foam be happy to help!
most popular articles by: How to know the password of Wi-Fi? (1729) What is the coon? (1597) What does the cross tattoo? (1518) What are the icons to be home? (1430) How to decorate a yard? (1259) that draw a girl? (1147) active foam How to make an ax in Minecraft? (1047) How to make a hairstyle for prom? (1003) What does the star tattoo? active foam (992)